Go to TogaWare.com Home Page. GNU/Linux Desktop Survival Guide
by Graham Williams
Duck Duck Go

Monju Install Log


Download ubuntu-9.04-netbook-remix-i386.img from http://www.ubuntu.com/getubuntu/download-netbook. Write to a USB thumb drive using ImageWriter (usb-imagewriter). Start eeePC holding Escape to get into BIOS and then select to boot from USB.

Download ubuntu-eee-8.04.1.iso from http://www.ubuntu-eee.com/. This was then copied to a USB thumb drive using the unetbootin-eeeubuntu-linux-238 application from http://sourceforge.net/projects/unetbootin/.

Plug the USB into the EeePC and whilst rebooting hold the Escape key down to get into the BIOS then TAB to select to boot from the USB. This will boot into the Ubuntu-Eee installer. The options chosen: Language: English; Location: Sydney; Keyboard: USA, Partition: Guided resize sda into 20GB for MS/Windows and 20GB for Ubuntu.

The resizing ended up with: “Resize operation failure. An error occurred while the changes to the storage devices. The resize operation has been aborted.” A bit of exploration indicates that the MS/Windows NTFS journal is not in a proper state. So restart in MS/Windows and exit from it cleanly, to make sure all is okay. It might have got into that state because I had upgraded the BIOS (is that relevant) and on booting I wasn't seeing the BIOS message about tapping F2 or ESC. I might have interrupted a startup one time try to get into the BIOS! Tapping F2 when turning it on seems to get into the BIOS, but it was hit and miss between F2/TAB/ESC! Got there eventually and this time was able to resize the partition.

Back to the installation. The resizing worked! User: gjw; Hostname: monju; Migrate MS/Windows: None; Install took about 10 minutes; Restart Now and screen went black and stayed that way!!! Had to power cycle with the power button for 10 seconds. Restart and Grub kicked in and booted Ubuntu! Note that this install defaults to the nice (though not all agree) and very easy to use Netbook Remix user interface.

The guided partition, with the resizing, ended up with:

/dev/sda1 20G (/c)
/dev/sda2 35G (/home)
/dev/sda5 20G /
/dev/sda6   swap

Using the partition manager I formatted /dev/sda2 as ext3 and mount that as /home (with an entry in /etc/fstab) and mount /dev/sda1 as /c, the MS/Windows C drive.

Installed wajig, then did an upgrade.

Some other applications installed include: most emacs-snapshot ntp libglade2-dev r-recommended ggobi r-cran-rgtk2 r-cran-cairodevice r-cran-rggobi openssh-server

Install rattle.

Copyright © 1995-2018 Togaware Pty Ltd
Support further development through the purchase of the PDF version of the book.
Brought to you by Togaware and the author of the open source software Rattle and wajig.
Also the author of Data Mining with Rattle and Essentials of Data Science.