Using a Cisco Air PCM350 series (PCM352) wireless PCMCIA card in a laptop. Card is recognised when inserted and the airo module is loaded and eth1 is identified. Card is also seen as wifi0! Install the CISCO Utilities (Version 2.0 from www.cisco.com as Linux-ACU-Driver-v2.0.tar.gz). Install as follows:
# mkdir /tmp/cisco # cd /tmp/csico # wget http://www.cisco.com/pcgi-bin/Software/Tablebuild/download.cgi/Linux-ACU-Driver-v2.0.tar.gz # tar zxvf Linux-ACU-Driver-v2.0.tar.gz # mkdir -p /opt/cisco/bin # mv utilities/* /opt/cisco/bin # mv helpml.tar.gz /opt/cisco # cd /opt/csico # tar zxvf helpml.tar.gz # tm helpml.tar.gz # cd # /opt/cisco/bin/acu
For LEAP authentication you can login with a username and password. This can be set up with:
# leapscript <username> <password>
Then start up a network connection on wifi0:
# ifup wifi0
Trying a ifup eth1 freezes the machine (Kernel 2.4.23).
DHCP fails at present. The wireless card is ``associatied’’. Have tried:
- acpi=off for booting - no luck
- removing the NIC module (3c59x) and reinserting wireless so that it becomes eth0 - no luck.
- Perhaps you may need to first set your IP address to 0.0.0.0 subnet mask 255.255.255.0 before initializing the DHCP client process (a known problem when the DHCP server is Windows). How to do this?
Fixed IP also fails to work.
WARNING: On the laptop, suspend to disk fails to resume when the card is plugged in!!!! TODO Fix this.
Your donation will support ongoing availability and give you access to the PDF version of this book. Desktop Survival Guides include Data Science, GNU/Linux, and MLHub. Books available on Amazon include Data Mining with Rattle and Essentials of Data Science. Popular open source software includes rattle, wajig, and mlhub. Hosted by Togaware, a pioneer of free and open source software since 1984. Copyright © 1995-2022 Graham.Williams@togaware.com Creative Commons Attribution-ShareAlike 4.0